Adjustable Elbows 45°

Adjustable 45 Degree elbows are are used to make turns in runs of round pipe and flexible duct from 0 (straight) to 45 degrees. They are also crimped on one end to easily fit into a pipe or duct fitting of the same diameter. They have a sturdy galvanized steel construction and are simple to adjust, and fabricated from premium galvanized steel. They are the fitting to use when needing to make tight corners and are utilized for maintaining the best airflow for maximum efficiency in your HVAC system. These elbows are made of 26 gauge galvanized sheet metal up to 12″ or 24 gauge galvanized sheet metal from 14″ to 24″. Ideal application with either flexible duct or sheet metal duct.

Adjustable Elbows 90°

Adjustable 90 Degree elbows are are used to make turns in runs of round pipe and flexible duct from 0 (straight) to 90 degrees. They are also crimped on one end to easily fit into a pipe or duct fitting of the same diameter. They have a sturdy galvanized steel construction and are simple to adjust, and fabricated from premium galvanized steel. They are the fitting to use when needing to make tight corners and are utilized for maintaining the best airflow for maximum efficiency in your HVAC system. These elbows are made of 26 gauge galvanized sheet metal up to 12″ or 24 gauge galvanized sheet metal from 14″ to 24″. Ideal application with either flexible duct or sheet metal duct.

Flat Duct Elbow 45°

45 Degree flat elbows are used to make turns in runs of rectangular metal sheet duct. They have a sturdy galvanized steel construction and are simple to adjust, and fabricated from premium galvanized steel. They are utilized for maintaining the best airflow for maximum efficiency in your HVAC system. These elbows are made of 26 gauge galvanized sheet metal up to 12″ or 24 gauge galvanized sheet metal from 14″ to 24″. Ideal application with sheet metal duct.

Flat Oval Elbow 45°

45 Degree flat oval elbows are used to make turns in runs of oval duct. They have a sturdy galvanized steel construction and are simple to adjust, and fabricated from premium galvanized steel. They are utilized for maintaining the best airflow for maximum efficiency in your HVAC system. These elbows are made of 26 gauge galvanized sheet metal, available for size 6”, 7” and 8”.

Flat Oval Elbow 90°

90 Degree flat oval elbows are used to make turns in runs of oval duct. They have a sturdy galvanized steel construction and are simple to adjust, and fabricated from premium galvanized steel. They are utilized for maintaining the best airflow for maximum efficiency in your HVAC system. These elbows are made of 26 gauge galvanized sheet metal, available for size 6”, 7” and 8”.

Flat Stack Elbow 45°

45 Degree flat stack elbows are used to make turns in runs of rectangular metal sheet stacks. They have a sturdy galvanized steel construction and are simple to adjust, and fabricated from premium galvanized steel. They are utilized for maintaining the best airflow for maximum efficiency in your HVAC system. These elbows are made of 26 gauge galvanized sheet metal up to 12″ or 24 gauge galvanized sheet metal from 14″ to 24″. Ideal application with sheet metal stack.

Flat Stack Elbow 90°

90 Degree flat stack elbows are used to make turns in runs of rectangular metal sheet stacks. They have a sturdy galvanized steel construction and are simple to adjust, and fabricated from premium galvanized steel. They are utilized for maintaining the best airflow for maximum efficiency in your HVAC system. These elbows are made of 26 gauge galvanized sheet metal up to 12″ or 24 gauge galvanized sheet metal from 14″ to 24″. Ideal application with sheet metal stack.

Jumper Elbow 90°

90 Degree jumper elbows are used to make turns in runs of rectangular metal sheet duct. They have a sturdy galvanized steel construction and are simple to adjust, and fabricated from premium galvanized steel. They are utilized for maintaining the best airflow for maximum efficiency in your HVAC system. These elbows are made of 26 gauge galvanized sheet metal up to 12″ or 24 gauge galvanized sheet metal from 14″ to 24″. Ideal application with sheet metal duct.

Vertical Duct Elbow 45°

45 Degree vertical elbows are used to make turns in runs of rectangular metal sheet duct. They have a sturdy galvanized steel construction and are simple to adjust, and fabricated from premium galvanized steel. They are utilized for maintaining the best airflow for maximum efficiency in your HVAC system. These elbows are made of 26 gauge galvanized sheet metal up to 12″ or 24 gauge galvanized sheet metal from 14″ to 24″. Ideal application with sheet metal duct.

Vertical Duct Elbow 90°

90 Degree vertical elbows are used to make turns in runs of rectangular metal sheet duct. They have a sturdy galvanized steel construction and are simple to adjust, and fabricated from premium galvanized steel. They are utilized for maintaining the best airflow for maximum efficiency in your HVAC system. These elbows are made of 26 gauge galvanized sheet metal up to 12″ or 24 gauge galvanized sheet metal from 14″ to 24″. Ideal application with sheet metal duct.

Vertical Duct Elbow 90°

90 Degree vertical elbows are used to make turns in runs of rectangular metal sheet duct. They have a sturdy galvanized steel construction and are simple to adjust, and fabricated from premium galvanized steel. They are utilized for maintaining the best airflow for maximum efficiency in your HVAC system. These elbows are made of 26 gauge galvanized sheet metal up to 12″ or 24 gauge galvanized sheet metal from 14″ to 24″. Ideal application with sheet metal duct.

Vertical Oval Elbow 45°

45 Degree vertical oval elbows are used to make turns in runs of oval duct. They have a sturdy galvanized steel construction and are simple to adjust, and fabricated from premium galvanized steel. They are utilized for maintaining the best airflow for maximum efficiency in your HVAC system. These elbows are made of 26 gauge galvanized sheet metal, available for size 6”, 7” and 8”.

Vertical Oval Elbow 90°

90 Degree vertical oval elbows are used to make turns in runs of oval duct. They have a sturdy galvanized steel construction and are simple to adjust, and fabricated from premium galvanized steel. They are utilized for maintaining the best airflow for maximum efficiency in your HVAC system. These elbows are made of 26 gauge galvanized sheet metal, available for size 6”, 7” and 8”.

Vertical Stack Elbow 45°

45 Degree vertical stack elbows are used to make turns in runs of rectangular metal sheet stacks. They have a sturdy galvanized steel construction and are simple to adjust, and fabricated from premium galvanized steel. They are utilized for maintaining the best airflow for maximum efficiency in your HVAC system. These elbows are made of 26 gauge galvanized sheet metal up to 12″ or 24 gauge galvanized sheet metal from 14″ to 24″. Ideal application with sheet metal stack.

Vertical Stack Elbow 90°

90 Degree vertical stack elbows are used to make turns in runs of rectangular metal sheet stacks. They have a sturdy galvanized steel construction and are simple to adjust, and fabricated from premium galvanized steel. They are utilized for maintaining the best airflow for maximum efficiency in your HVAC system. These elbows are made of 26 gauge galvanized sheet metal up to 12″ or 24 gauge galvanized sheet metal from 14″ to 24″. Ideal application with sheet metal stack.