Square Ceiling Diffuser 4 Directions Air Discharge
Square ceiling diffuser can be used for both supply and return applications.
Showing 193–208 of 239 results
Square Duct End Cap
Square duct end cap is used to seal the end of square duct. It is available in size from 8” x 8” to 24” x 12”, and more sizes available for customer request. This square duct end cap is made of 26 gauge galvanized sheet metal up to 12″ or 24 gauge galvanized sheet metal from 14″ to 24″.
Square Duct Transition
Square duct transition is used to connect square duct in different size. It is available in size for starting end from 10” x 8” to 24” x 10” and for ending size from 8”x 8” to 20” x 10”. More size available for customer request. The square duct transition is made of 26 gauge galvanized sheet metal up to 12″ or 24 gauge galvanized sheet metal from 14″ to 24″.
Square Swirl Diffuser
Square swirl diffuser can be use as supply diffuser for place needs high air volume with ceiling hight from 8.5ft to 13ft. Optional accessories: plenum box, round slide damper. The square swirl diffuser is aluminum constructed with white (or customized color) powder coating or anodized finish.
Stack Boot 90°
A 90 degree stack boot is made to easily transit airflow from a round flexible or hard duct to a rectangular metal sheet stack with a 90 degrees turn. The boot can be fastened to other ducts, including ceiling and wall units, using a nail and screw. 90 degree stack boot available in size for round inlet from 4” to 8”, for rectangular outlet from 2-1/4” x 10” to 6” x 14” and more sizes available for customer request. These boots are made of 26 gauge galvanized sheet metal up to 12″ or 24 gauge galvanized sheet metal from 14″ to 24″.
Stack End Cap
Stack end cap is used to seal the end of wall stack. It is available in size from 2-1/4” x 10” to 3-1/4” x 14”, and more sizes available for customer request. This stack end cap is made of 26 gauge galvanized sheet metal.
Stack Head with Wings
This stack head with wing is used for transition from rectangular stack duct to register or grille, built-in wings allow for convenient attachment to wall studs. This stack head is available in size for stack inlet from 10” x 3-1/4” to 14” x 3-1/4”, for rectangular outlet from 10”x 6” to 14” x 6”, and more sizes available for customer request. These stack head are made of 26 gauge galvanized sheet metal up to 12″ or 24 gauge galvanized sheet metal from 14″ to 24″.
Stack Start Collar
This stack start collar is used for transition from plenums (duct board or lined) or a flat surface to square stack. This stack start collar is available in size from 2-1/4” x 12” to 3-1/4” x 14” and more sizes available for customer request. These stack start collar are made of 26 gauge galvanized sheet metal up to 12″ or 24 gauge galvanized sheet metal from 14″ to 24″.
Straight Register Boot
A straight register boot is made to easily transit airflow from a round flexible or hard duct to a rectangular register or vent. The boot can be fastened to other ducts, including ceiling and wall units, using a nail and screw. Straight register boot available in size for round inlet from 4” to 8”, for rectangular out let from 2-1/4” x 10” to 6” x 14” and more sizes available for customer request. These boots are made of 26 gauge galvanized sheet metal up to 12″ or 24 gauge galvanized sheet metal from 14″ to 24″.
Straight Register Boot with 17” Plate
A straight register boot with 17” plate is made to easily transit airflow from a round flexible or hard duct to a rectangular register or vent. The boot can be fastened to other ducts, including ceiling and wall units, using a nail and screw. Straight register boot available in size for round inlet from 6” to 8”, for rectangular outlet from 8” x 8” to 4” x 12” and more sizes available for customer request. These boots are made of 26 gauge galvanized sheet metal up to 12″ or 24 gauge galvanized sheet metal from 14″ to 24″.
Straight Stack Boot
A straight stack boot is made to easily transit airflow from a round flexible or hard duct to a rectangular metal sheet stack. The boot can be fastened to other ducts, including ceiling and wall units, using a nail and screw. Straight stack boot available in size for round inlet from 4” to 8”, for rectangular out let from 2-1/4” x 10” to 6” x 14” and more sizes available for customer request. These boots are made of 26 gauge galvanized sheet metal up to 12″ or 24 gauge galvanized sheet metal from 14″ to 24″.
Supply Grille Double Deflection
Double deflection supply grille, aluminum constructed. Front Blades can be paralleled to long dimension or short dimension, and front blades and rear blades are independently adjustable. Optional accessories: damper, plenum box. We provide white (or customized color) powder coating or anodized finish.
Supply Grille Single Deflection
Single deflection supply grille, aluminum constructed. Blades can be paralleled to long dimension or short dimension, and blades are independently adjustable. Optional accessories: damper, plenum box. We provide white (or customized color) powder coating or anodized finish.
Threaded Conduit Body LB Type
Conduit body LB type is constructed with die cast aluminum, with powder coating finish, cover and gasket included. Conduit body provides access to conductors for pulling, splicing, maintenance and future changes and upgrades. Conduit body is threaded and compatible with Rigid and IMC conduit. Conduit body diameter is available from 1/2”to 2”.
Threaded Conduit Body LC Type
Conduit body LC type is constructed with die cast aluminum, with powder coating finish, cover and gasket included. Conduit body provides access to conductors for pulling, splicing, maintenance and future changes and upgrades. Counduit body is threaded and compatible with Rigid and IMC conduit. Conduit body diameter is available from 1/2”to 2”.
Threaded Conduit Body LL Type
Conduit body LL type is constructed with die cast aluminum, with powder coating finish, cover and gasket included. Conduit body provides access to conductors for pulling, splicing, maintenance and future changes and upgrades. Conduit body is threaded and compatible with Rigid and IMC conduit. Conduit body diameter is available from 1/2”to 2”.